How Much Does Landscape Lighting Cost in Buffalo, NY?

If you're thinking about lighting up your home, the first question is usually the same: what's this going to cost? The honest answer is "it depends," but that's not very helpful. So here's what actually drives the price of landscape lighting in Buffalo and Western New York, plus typical ranges so you can plan.

The short answer

Nationally, professionally installed low-voltage landscape lighting typically runs about $2,000 to $4,500, with an average around $3,250, according to LawnStarter's 2026 cost guide. Installed fixtures generally land around $100 to $200 each.

Your project could be below or above that range. A small front-yard package with a few uplights and path lights is a very different job than lighting a full property with trees, a long driveway, a patio and a pool.

What drives the cost

1. How many areas you want lit. Most homeowners start with the front of the house: a few uplights on the architecture, a tree or two, and lights along the walkway. Adding the driveway, side yards, backyard, patio or pool adds fixtures and wire.

2. The number and type of fixtures. Uplights, path lights, wall washers, step lights and downlights all cost different amounts. Quality brass and copper fixtures cost more up front than big-box aluminum, but they hold up far better in Buffalo weather.

3. The size and layout of your property. Long runs to trees at the back of a lot or down a long driveway take more wire and labor. Big lots in places like Orchard Park, Elma, Clarence and East Aurora usually need more than a city lot in Buffalo.

4. Your existing landscaping. Lighting an established yard means working carefully around mature plantings, beds and hardscape, which takes more time than lighting a yard that's being landscaped from scratch.

5. Controls. A simple timer or dusk-to-dawn sensor is the most affordable. Smart controls that let you run your lights from your phone add some cost.

What's different about lighting in Buffalo

Western New York is hard on outdoor equipment. A system built for Buffalo should account for:

• Snow and plowing. Fixtures near the driveway and walkways need to be placed where snowblowers, shovels and plows won't take them out.

• Freeze-thaw cycles. Outdoor-rated fixtures, sealed connections and properly buried wire matter here.

• Long winter nights. The good news: lighting gets used more here than almost anywhere. Lit trees and snow look incredible from November through March.

Cutting corners to save a few hundred dollars up front usually costs more later in repairs.

Low-voltage LED is the standard

Professional systems today are almost always low-voltage LED. A transformer steps household power down to a safer, lower voltage for the fixtures. LEDs use very little electricity, run cool and last for years, so the cost to run a typical system is small.

Why design matters more than fixture count

The best-looking homes aren't the ones with the most lights. They're the ones where someone chose what to light and what to leave dark. At GinoTech, we design every system around your home's architecture and trees, then come back after sunset to aim and adjust every fixture. That nighttime adjustment keeps light out of your windows and your neighbor's, and makes the whole system look intentional.

How to get an accurate price

Online ranges are a starting point. The only way to get a real number is to have someone walk your property. We'll walk it with you, design the layout and fixtures, and give you a clear, free, no-pressure estimate.

We serve Buffalo, Amherst, East Amherst, Williamsville, Clarence, Clarence Center, Orchard Park, East Aurora, Elma, Lancaster, Grand Island and Lewiston.

Ready to see what your home could look like at night? Call or text GinoTech at (716) 888-0962 for a free estimate.

Source: LawnStarter, How Much Does Landscape Lighting Cost in 2026?